Owner & Installation Manual

INSTALLATION INSTRUCTIONS
A f f i n i t y 3 0 G p
Evo, Inc., 20560 SW 115th Ave., Tualatin, OR 97062 USA
Phone [phone] | Fax [phone] | www.evoamerica.com | [e-mail]
16
Locate Parts Box shipped your Affi nity 30Gp and the parts bag containing the Rear Retaining
Bullet Fastener, two each 1/4” x 20 hex bolt and locking nut, and two each J-Hook. Follow
the illustration show on this page. Using a 7/16” wrench tighten the Rear Retaining Bullet to a
cook surface tab as shown (Ensure the Rear Retaining Bullet is placed on the right hand side
of the tab). Next, loop the J-Hook through the inside slot of each remaining tab.
ASSEMBLING COOK SURFACE RETAINING FASTENERS
IT IS RECOMMENDED THE COOKING SURFACE BE PLACED ON A PROTECTED
WORK SURFACE WITH THE FLANGE FACING UPWARD.
PLACE REAR
RETAINING BULLET
FASTENER ON RIGHT
HAND SIDE OF TAB.
USING A 7/16”
WRENCH, TIGHTEN
THE REAR RETAINING
BULLET TO THE
COOKING SURFACE
TAB WITH TWO EACH
1/4” X 20 HEX BOLT
AND LOCKING NUT.
ENSURE THE BOLTS
ARE TIGHTENED
SECURELY.
LOOP THE J-HOOK
THROUGH THE
INSIDE SLOT OF
TWO TABS AS
SHOWN.