Owner & Installation Manual

INSTALLATION INSTRUCTIONS
A f f i n i t y 3 0 G p
Evo, Inc., 20560 SW 115th Ave., Tualatin, OR 97062 USA
Phone [phone] | Fax [phone] | www.evoamerica.com | [e-mail]
22
BLEEDING AIR FROM GAS LINE
IT IS IMPORTANT TO BLEED OUT THE GAS LINE, OR ‘PURGE’, TO ENSURE ALL
AIR POCKETS ARE REMOVED. IF YOU DO NOT BLEED YOUR GAS LINE AND
THERE ARE AIR POCKETS IN THE LINE YOUR APPLIANCE MAY NOT START
How To Bleed The Gas Line:
Step 1: Turn on gas at the gas inlet valve (external to the evo appliance and supplied by others).
Step 2: Locate the gas bleed port, and using a small fl at-blade screwdriver, open the gas bleed screw until all the air
is purged from the gas line and until there is a faint smell of gas and then immediately close the bleed screw.
Step 3: It is extremely important to ensure the gas bleed screw is completely closed to prevent gas from leaking from
the gas bleed port.
IT IS EXTREMELY IMPORTANT TO ENSURE THE GAS BLEED SCREW IS COMPLETELY
CLOSED TO PREVENT GAS FROM LEAKING FROM THE GAS BLEED PORT OR
POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, COULD RESULT IN
DEATH OR SERIOUS INJURY
GAS BLEED PORT