Owner & Installation Manual

INSTALLATION INSTRUCTIONS
A f f i n i t y 3 0 G p
Evo, Inc., 20560 SW 115th Ave., Tualatin, OR 97062 USA
Phone [phone] | Fax [phone] | www.evoamerica.com | [e-mail]
7
UNPACKING COOKTOP COMPONENTS
COOK SURFACE: LIFT AND SEPARATE COOK SURFACE FROM UNIT AND PLACE
NEXT TO INSTALLATION AREA.
DRIP PAN GASKET:
GASKET
INSTALLED TO
TOP OF DRIP TRAY.
REMOVE GASKET
FROM DRIP TRAY
AND SET ASIDE
FOR FINAL
INSTALLATION.
DRIP PAN:
UNLATCH PAN
FROM CIRCULAR
SKIRT, THEN
CAREFULLY LIFT
AND SEPARATE
DRIP PAN FROM
UNIT AND
PLACE NEXT TO
INSTALLATION
AREA. TAKE
CARE NOT TO
SCRATCH DRIP
PAN DURING
INSTALLATION.
CHASSIS:
LIFT CHASSIS
FROM CRATING
BOX AND PLACE
ON ITS SIDE NEXT
TO INSTALLATION
AREA.
METAL RIGHT ANGLE BRACKETS:
UNSCREW FROM UNIT AND KEEP
SCREWS AND BRACKETS HANDY
FOR FIRST INSTALLATION STEP.
As you are unpacking the crate, make sure you locate all components before installation.
Pilot light and ignition parts are exposed during uncrating and installation.
Use caution and do not alter factory set positions.
THE COOK SURFACE IS HEAVY. USE CAUTION WHEN LIFTING.
REMOVE TIE
DOWN BOLTS
AND TABS
HOLDING
CHASSIS TO
PACKING
CRATE BASE
USING 7/16”
WRENCH.