Installation Guide

110VAC
Anti-fog
pad
OutputInput
Output
Dimmer Switch
12V LED Light
Internal Power Flow Diagram
110VAC
Anti-fog
pad
OutputInput
Output
Dimmer Switch
12V LED Light
110VAC
Anti-fog
pad
OutputInput
Output
Dimmer Switch
12V LED Light
110VAC -12VDC
LED
driver
Power Source：
Constant 110AC
power
Power Source：
Ceiling/Vanity
Light controlled by
a non-dimmable
switch On/Off
switch on the wall.
Power Source：
Ceiling/Vanity
Light controlled by
a
non-dimmable
switch On/Off
switch on the wall.
110VAC -12VDC
LED
driver
110VAC -12VDC
LED
driver
Scenario 1
(Direct Wired)
This is the most common way to
connect the mirror. The LED light
& anti fog pad are both controlled
by the built-in touch switch on the
mirror.
*The LED light is dimmable.
Scenario 2
(Wall Switch)
By doing so, the mirror is now
bridged to the wall switch. In order
to turn on the mirror,the wall
switch needs to be on. The touch
switch can be used to turn on the
LED mirror and anti-fog pad. The
mirror shuts down once the wall
switch is filpped to OFF.
Scenario 3
(Wall Dimmer Switch –
Not Accepted)
This is a scenario that is not
acceptable. There is no work
around for our mirror.
Do not try this way as it will
damage the LED driver.
E486300
LED Mirror Power Source FAQ