Full Product Manual

www.general.ca

ITEM

#EX-21BS

EX-21BS_V4_R2 - 07-01-2015 © COPYRIGHT GENERAL INTERNATIONAL

PART NO. DESCRIPTION SPECIFICATION QTY

EX21-S01 HEX BOLT 5/16” -18UNC X 1” 4

EX21-S02 WASHER 5/16” 32

EX21-S03 TOP SHORT SHELF 2

EX21-S04 TOP LONG SHELF 2

EX21-S05N LEG 4

EX21-S06 HEX NUT 5/16” 28

Adjustable height stand

24 1/2” to 31 1/2”

6. Flip the assembly on one side, then attach the remain-

ing sub-assembly U as shown in V.

7. Attach the leveling feet supplied with your saw to the

bottom of the stand legs (see parts diagram below,

parts # 9,10) and level the stand.

Note: See warning regarding leveling in your scroll saw

manual.

8. Attach your EX-16 or EX-21 scroll saw to the stand using

the 4 supplied hex bolts with 2 washers and a nut as

shown below (#1, 2, 3 and 6), then firmly tighten all

bolts.

ASSEMBLY INSTRUCTIONS (CONTINUED)

PARTS LIST - EX-21BS

PART NO. DESCRIPTION SPECIFICATION QTY

EX21-S07 SHORT TIE BAR 2

EX21-S08 LONG TIE BAR 2

EX21-S09 NUT

(INCLUDED WITH MACHINE) 3/8” 8

EX21-S10 LEVELING FOOT

(INCLUDED WITH MACHINE) 3/8” 4

EX21-S13 CARRIAGE BOLT 5/16” 24

EX21-S14 ADJUSTABLE LEG EXTENSION 4

CLOSE UP VIEW