Product Warranty

1. Rear Main Frame Installation

Remove two Bolts (49), four Bolts (23), and six Washers (24) from the Rear Main

Frame (3). Remove bolts with the Allen Wrench provided.

Connect the Middle Section Hand Pulse Sensor Wires (55) from the Rear Main Frame

(3) to the Extension Hand Pulse Sensor Wires (65) from the Front Main Frame (5).

Attach the Rear Main Frame (3) into the Front Main Frame (5) with two Bolts (49), four

Bolts (23), and six Washers (24) that were removed. Tighten bolts with the Allen

Wrench provided.

Adjust the seat position and insert the Knob (81) in the clockwise direction to tighten.

ASSEMBLY

6mm Allen Wrench

Tool: