Product Warranty

2. Front and Rear Stabilizers Installation
Position the Front Stabilizer (2) in front of the Front Main Frame (5) and align bolt holes.
Attach the Front Stabilizer (2) onto the front curve of the Front Main Frame (5) with two
Bolts (30), two Curve Washers (25), and two Cap Nuts (32). Tighten cap nuts with the
Multi Hex Tool with Phillips Screwdriver provided.
Position the Rear Stabilizer (4) behind the Rear Main Frame (3) and align bolt holes.
Attach the Rear Stabilizer (4) onto the rear curve of the Rear Main Frame (3) with two
Bolts (30), two Curve Washers (25), and two Cap Nuts (32). Tighten cap nuts with the
Multi Hex Tool with Phillips Screwdriver provided.
12
ASSEMBLY
Hardware:
(25) Curve Washer
4 PCS
(32) Cap Nut
4 PCS
(30) Bolt
4 PCS
Tool:
Multi Hex Tool with
Phillips Screwdriver