Operation Manual

23
• Checkregularlythatneitherthecord
nor the plug is damaged and do not
use if they are, or if the appliance
has been dropped or damaged in
any other way.
• Iftheappliance,cordorplughas
been damaged, have the appliance
inspected and if necessary repaired
by an authorised repairer. Never
try to repair the appliance yourself.
Please contact the store where you
bought the appliance for repairs
undertheguarantee.Unauthorised
repairsormodicationstothe
appliance will invalidate the
guarantee.
KEY TO THE MAIN COMPONENTS
OF THE APPLIANCE
1. Limescalelter(notshown)
2. Release button for lid
3. Lid
4. Fourtemperatureindicators(40°C,
60°C,80°C,100°C)
5. Button for adjusting the temperature
6. On/Offbutton
7. Cord and plug
8. Connector
9. Cord holder
10. Base
11. Button for heat maintenance function
12. Water level gauge
PRIOR TO FIRST USE
Beforeusingforthersttime(oraftera
longperiodofstorage),lltheappliance
with water and boil the water. Empty
andrellandboilagain.
1. Fill the appliance up to the
maximum level (”MAX”) shown
on the water level gauge (12) (the
appliance can hold a maximum of
1.2 litres).
2. Switch on as described under
”UsingtheAppliance”.Allowthe
water to boil.
3. Pouroutthewateronceithas
boiled.
4. Repeat point 2 once more. The
appliance is now ready for use.
USING THE APPLIANCE
1. Openthelid(3)usingtherelease
button (2).
2. Pour fresh water into the appliance.
Fill the appliance with water at least
to the minimum mark (”MIN”) and
not exceeding the maximum mark
(”MAX”). The marks are shown on
the water level gauge.
3. Closethelidandensurethatit
clicks into place.
4. Placetheapplianceonitsbase(10)
bypositioningitsotheconnector(8)
onthebasetsintotheholeonthe
underside of the appliance.
5. Connect the appliance by plugging
the plug (7) into the socket and
turning the power on.