Operation Manual

24
6. Adjustthetemperaturetowhich
the water should be heated by
pressing the button for adjusting the
temperature (5). There is a choice
of four different temperatures:
40°C,60°C,80°Cor100°C.The
temperature indicator (4) will light on
after the desired temperature is set.
7. PushtheOn/Offbutton(6).The
indicator lamp for the selected
temperaturewillashandthe
appliance will start heating the
water.
o When the water has been
heated to the selected
temperature, the indicator lamp
will light off and the appliance
will automatically turn off.
o If you want to interrupt the
boiling, you can shut off the
appliance at any time using the
On/Offbutton.
o By default, the appliance is set
toheatthewaterto100°C:If
you want to heat the water to
100°C,simplypresstheon/
off button to start heating the
water.
8. Whenthewaterisheatedup,you
can maintain the heat using the heat
maintenance function (11).
o Set the desired temperature by
pressing the button for adjusting
the temperature. Press the
button for the heat maintenance
functionandthenpresstheon/
off button.
o When the heat maintenance
function is activated, the button
for the heat maintenance
functionwillturnintoashing
from the state of constant
on. The button for the heat
maintenance function can
be deactivated by pressing
the button once more, or by
pressingtheon/offbutton.The
active time will be 2 hours under
the heat maintenance mode.
o Whilst the heat maintenance
function is activated, the button
for adjusting the temperature
may not be used.
o The appliance remembers the
temperature for which the heat
maintenance function was last
set. If you would like to change
this temperature, you should
adjust the temperature next
time you use the appliance.
o The appliance can be set to
heat the water to a desired
temperature and automatically
keep warm at the desired
temperature from the beginning.
Press the button for adjusting
the temperature to adjust the
desired temperature, then
press the button for the heat
maintenance function to select
the heat maintenance function,
andpressthe“On/Off”button
to start heating the water. The
temperature indicator will turn
intoashingfromthestate
of constant on after starting
to heat the water. When the
water attains the desired
temperature, the temperature
indicator will turn into constant
onfromthestateofashing,
and the indicator of the heat
maintenance button will turn
intoashingfromthestateof
constant on. The appliance
comes into the mode to keep
the water warm at the set
temperature.
Tip: You can wind any excess cord
into the cord storage holder (9) on the
underside of the base.