Installation Manual

What’s in the box ? Instruction
1 X Car Mount Bracket
1 X Suction Cup Mount
1 X Support Pad
Our Service
If you have any question,please feel free to
contact us.It is our pleasure to service you.
[e-mail]
Kyle Liao-1992
new-chao
Instructions
Long Arm Car Mount Holder
1. Inster the adjuster into the
mount ball joint adapter.
2. Insert the ball into the socket
at the back of bracket,turn
the adjuster to tigthen.
7.1 CM
2.8 inch
5.0 CM
1.9 inch
30 CM
1.3CM
12 inch
4.8-9.5 CM
1.9-3.7 inch
Specification
5. Press the button at the back
of bracket to pull the clamp
arms.
3. Push suction cup firmly against
windshield and press the lever
to lock.
(Note:tear off the protective film
before install the mount)
4. Lift up the mount from cradle
to put support pad under the
mount.
6.Put your device into bracket
then grip. Adjust the angle to
fit your optimal viewing angle.
（Horizontal or vertical）
1
2
To let the mount be more stable while driving,it is suggested to
set the support pad closer to the bracket, as shown in position 1.
warm reminder: