User Guide

Tech Tip
Level installation of the EnCore rails to the truck
bed rail is the key to a successful install.
Figure 1: Some trucks have an indentation in the
lower section of the bed rail.
GM Non-Specific
Figure 2: Some trucks have a tapered clamping
surface on the truck bed rail.
Ford/Toyota Non-Specific
Figure 3: Some trucks have a square bed rail.
Dodge Non-Specific
Rail Reference Sheet
Spacer Seal and Shim Placement
I M P O RTA N T
Your EnCore side rails have had either a spacer seal or shims attached
to provide for easy installation. The spacer or shims help provide a
level sitting rail to enable secure tonneau latching. Please refer
to images below and the guide on the following page per
application or vehicle type to confirm the correct
application of the seals or shims. Some adjustments
may be required to help enable a level rail
once clamped in place.
Completely
Level
Rail Spacer
Seal
Rail Spacer
Seal
Rail Spacer
Seal
SPACER SEAL LOCATIONS
Extang Corporation, 5400 S. State Road, Ann Arbor, MI 48108, 734 677-0444, Fax: [phone]
Visit us at: extang.com