Installation Manual

ManualsBrandsExtang ManualsOtherExtang eMax Tonno Soft Folding Truck Bed Tonneau Cover | 72650 | fits Chevy/GMC Silverado/Sierra (6 1/2 ft) 07-13, 2014-2500HD & 3500HD, without track system

Insert sliding clamp into

attachement bow and

rotate 90°, then secure

cab rail to underbody

rail with sliding clamp.

Clamps should be fully secured under

the radius section of the

underbody rail.

Tighten with 1/2” socket to 10 lb-ft.

Position bedrail on truck bed side 1/2” from inside of front bed

wall. NOTE: Make sure that both side rails are positioned

exactly the same distance from the truck bed.

Align the top of the underbody rail flush with the top of the truck

bed and secure the clamps as shown.

NOTE: Clamps should be located as close to the underbody rail

ends as possible.

1/2“

socket

lb-ft

Place tonno over

cab end of truck box.

NOTE: the cab rail

should lay over the front

of bed wall.

1/2”

Extang Corporation

5400 S. State Road

Ann Arbor, MI 48108

734 677-0444, Fax: 734 677-8409

extang.com

Item No. 72000-30-1511 RH

Carefully refold the tonno

without shifting its position

on the truck bed.

Unfold the tonno fully and

adjust position over the

truck bed for proper

cab/tail

alignment.

• 1/2” Socket Wrench

• 3/16” Allen Wrench

Summary of content (6 pages)

PAGE 1
• 1/2” Socket Wrench • 3/16” Allen Wrench 1 Position bedrail on truck bed side 1/2” from inside of front bed wall. NOTE: Make sure that both side rails are positioned exactly the same distance from the truck bed. 1/2” Align the top of the underbody rail flush with the top of the truck bed and secure the clamps as shown. NOTE: Clamps should be located as close to the underbody rail ends as possible. 10 lb-ft 2 Place tonno over cab end of truck box.
PAGE 2
4 Fasten the tonno to the underbody rail with the tethers. Slide the tether out and attach to the footman loop on the underbody rail. 5 Adjust slam latches so they fully engage the underbody rail flange. Tighten with 3/16” allen wrench. With tailgate open, completely unfold the tonno and secure to the truck bed with spring clamps. Pull rear clamp down and hook under bottom edge of bed wall flange. Slide rear clamp out to bed wall.
PAGE 3
Replacement Parts NOTE: To order replacement parts, itʼs best to contact our Customer Service Department for assistance, to ensure getting the correct part for your vehicle application. When ordering, xxx represents the 3-digit suffix, as referenced on the sales receipt or vehicle application list.
PAGE 4
READ CAREFULLY - KEEP IN A SAFE PLACE PLEASE ATTACH AND SAVE YOUR SALES RECEIPT. ACTIVATE YOUR wARRANTY ONLINE AT ExTANg.COm. Maximum Strength Warranty - Lifetime frame and tarp warranty covers the following tonneaus: Revolution, Express, Trifecta and eMAX. ■ WARRANTY DURATION: Lifetime Frame – Extang offers a LIFETIME warranty against defective materials or workmanship on the Revolution, Express, Trifecta and eMAX rails, aluminum components, clamps, bows, hardware.
PAGE 5
SAVE GAS, Your ExtAnG tonnEAu MAY PAY For ItSElF! DID YOU KNOW? EXTANG TONNEAUS MAY IMPROVE GAS MILEAGE UP TO 10% HERE’S HOW: There are conservatively 850,000 Extang Tonneaus on the road everyday and based on the average gas savings, Extang tonneaus save America 102 million gallons of gas per year or approximately $382,500,000. Studies show the average truck owner drives 18,000 miles per year. At 15 mpg that comes to 1,200 gallons of gas.
PAGE 6
SOMETHING DAMAGED? MISSING PARTS? CALL US FIRST 800-877-2588 WE CAN HELP YOU QUICKLY AND EASILY OVER THE PHONE RAPID RESPONSE Lot code can be found on underside of cover. Lot Code:______________________________________ Purchase Date:_________________________________ Tonno Model: __________________________________ OVERNIGHT DELIVERY Experienced Customer Service staff to answer all your tonneau questions CUSTOMER SERVICE HOURS: 8:30 TO 5 EST, MONDAY - FRIDAY Printed in U.S.A.