User`s guide

14 MM560A-MM570A-EU-EN
V1.1 8/12
PC-COMM computer interface capabilities
The instrument equips with an optical isolated interface port at the meter back for data communication.
The optional PC interface kit is required to connect the meter to the PC computer. The software
features a digital display, an analog display, a comparator and a Data Graphical recorder display.
Refer to the README file in the interface kit for further details.
MAX/MIN RECORDING mode
Press REC button momentarily to activate MAX/MIN recording mode. The LCD annunciators “R” and
“MAX MIN” turn on. The meter beeps when new maximum or minimum reading is updated. Press the
button momentarily to read throughout the Maximum (MAX), Minimum (MIN), and Maximum minus
Minimum (MAX-MIN) readings. Press the button for 1 second or more to exit MAX/MIN recording
mode. Auto Power Off feature will be disabled automatically in this mode.
PEAK Capture
Press the PEAK button momentarily to activate PEAK mode to capture voltage or current signal
duration as short as 0.8ms. This mode is available in DC, AC, DC+AC modes of voltage and current
functions. The LCD annunciators “C” & “MAX” turn on. The meter beeps when new maximum or
minimum reading is updated. Press the button momentarily to read throughout the Maximum (MAX),
Minimum (MIN), and Maximum minus Minimum (MAX-MIN) readings. Press the button for 1 second or
more to exit PEAK capture mode. Auto Power Off feature will be disabled automatically in this mode.
Relative Zero mode
Relative Zero allows the user to offset the meter consecutive measurements with the displaying
reading as the reference value. Practically MAX/MIN recording feature readings can also be set as
relative reference value. Press the
button momentarily to activate and to exit Relative Zero
mode.
500000 high resolution mode
In DC voltage and frequency functions, press the 500000 button momentarily to toggle between the
4-4/5 digits fast mode and the 5-4/5 digits high resolution mode.