User`s guide

18 MM560A-MM570A-EU-EN
V1.1 8/12
6) SPECIFICATIONS
Display: 4-4/5 digits 50,000 counts. Selectable stable mode
5-4/5digits 500,000 counts for DC Voltage, & 6 digits
999,999 counts for Hz
Polarity: Automatic
Update Rate: 4-4/5 digits fast mode: 5 per second nominal;
5-4/5 digits stable mode: 1.25 per second nominal;
42 Segments Bar graph: 60 per second max
Operating Temperature: 0

C to 45

C
Relative Humidity: Maximum relative humidity 80% for temperature up to
31

C decreasing linearly to 50% relative humidity at 45

C
Pollution degree: 2
Storage Temperature: -20

C to 60

C, < 80% R.H. (with battery removed)
Altitude: Operating below 2000m
Temperature Coefficient: nominal 0.1 x (specified accuracy)/

C @(0

C -- 18

C or
28

C -- 40

C), or otherwise specified
Sensing: AC, AC+DC True RMS
Safety: Double insulation per IEC61010-1 2nd Ed., EN61010-1
2nd Ed., UL61010-1 2nd Ed. & CAN/CSA C22.2 No.
61010.1-0.92 to Category III 1000V AC & DC and
Category IV 600V AC & DC
MM560A Terminals (to COM) Measurement Category:
V : Category III 1000 Vac & Vdc and Category IV 600 Vac
& Vdc.
A / mA

A : Category III and Category IV 600 Vac and 300
Vdc.
MM570A Terminals (to COM) Measurement Category:
V / A / mA

A : Category III 1000 Vac & Vdc and Category
IV 600 Vac & Vdc.
Overload Protection:
MM560A:

A & mA : 1A/600V, IR 10kA or better, F fuse (BBS-1)
A : 10A/600V, IR 100kA or better, F fuse (KTK-10)
V : 1050Vrms, 1450Vpeak
mV,

, & Others : 600 Vdc & Vac rms
MM570A:

A & mA : 0.44A/1000V, IR 10kA or better, F fuse
(DMM-B-44/100)
A : 11A/1000V, IR 20kA or better, F fuse (DMM-B-11A)
V, mV,

, & Others : 1050Vrms, 1450Vpeak
Transient protection: 8kV (1.2/50

s surge)
E.M.C.: Meets EN61326-1:2006 (EN55022, EN61000-3-2,
EN61000-3-3, EN61000-4-2, EN61000-4-3,
EN61000-4-4, , EN61000-4-5, EN61000-4-6,
EN61000-4-8, EN61000-4-11)
In an RF field of 3V/m Capacitance function is not specified, other function
ranges: Total Accuracy = Specified Accuracy + 100 digits,
performance above 3V/m is not specified