User's Guide

You must check the Monitor Privacy Settings checkbox to activate the settings. Select the transmit and
receive data rates you want BSSs to use.
Apply a Security Profile
Once you have defined and added a Security Profile, you must apply it to your system
Note
You may select multiple Security Profiles by checking more than one checkbox.
You should always apply a Security Profile at the appliance level. When you do, the profile is inherited
for all the other levels. Then, if you have a level that needs a dierent Security Profile, you can apply that
profile to that level. For example, in the above screenshot, the Security Profile for AirDefense is the
Security_Corporate profile. Then, for a special case, you can override the Security Profile at the
AirDefense level and apply the Security_Guest profile to the Floor_1 network level.
Note
The Override settings option is available when you select (highlight) a network level below
the appliance level. Use the Expand button to reveal the other levels.
Click the Apply button to save your changes. Click the Reset button to discard your changes.
Auto-Placement Rules
Auto-Placement rules determine where devices will be placed in the network tree when they are
imported. Any device that has the specified parameter(s) and qualifying value(s) will be placed in the
selected network level.
Legacy Content
Appliance Platform
Extreme AirDefense User Guide for version 10.5. 1053