User's Guide

• SNMP write community
• SNMPv3 username
• SNMPv3 authentication passphrase
• SNMPv3 privacy passphrase
• SNMPv3 authentication algorithm (None, MD5, or SHA)
• SNMPv3 privacy algorithm (3DES, DES, AES128, AES192, AES256,or None)
• SNMP port
• SNMP timeout (in milliseconds)
• SNMP number of retries
• Console user
• Console password
• Console enable password
• Console protocol (SSH or Telnet)
• Console port
• HTTP user
• HTTP password
• HTTP protocol (HTTP or HTTPS)
• HTTP port
Examples:
comm_settings,ProfileName,3,public,private,snmpV3user,snmpV3authpassphr,snmpV3privpassphr,
MD5,
3DES,161,300,4,Cisco,Cisco,Cisco,SSH,22,admin,adminpassword,https,443
Note
Although the above example is shown on multiple lines, all entries must be on a single line
with no line breaks or carriage returns.
The fields for the comm_settings_loc record are:
• Import type (must be comm_settings_loc)
• Profile name
• MAC address or folder path (required field)
• Device type (ap, switch, or folder)
Once the communication settings are imported, they will override any inherited settings. To see the new
communication settings, go to the device's properties and select Communication Settings.
Examples:
comm_settings_loc,ProfileName,00:23:04:5e:d3:00,ap
comm_settings_loc,ProfileName,/US/Southeast/AirDefense,folder3
Note
For communications settings applied to a folder, the final field (device type) must be folder.
Appliance Platform Legacy Content
1064 Extreme AirDefense User Guide for version 10.5.