User's Guide

You have the option to save for the next update, update immediately or update later. If you choose to
update later, you must supply a date and time. You can supply a description that will help identify the
update later. A list of device types along with the number of aected devices that will be updated is
displayed. Also, if applicable, a list of unsupported settings is displayed. Click OK to apply changes or
Cancel to abort.
Updates to RF-Domain are treated as jobs and are included in Job Status under Configuration >
Operational Management. The description supplied in the confirmation helps identify jobs.
Click the Reset button to discard your changes.
Channel Settings
Channel Settings is used to select power and channel settings for the B/N/G radio and the A/N radio.
The settings are applied to APs and wireless switches.
You may configure Channel Settings at the appliance network level all the way down to the floor
network level, but you should always configure Channel Settings at the appliance level. Any network
level below the appliance level will inherit the configuration. If you need to have a dierent configuration
below the appliance level, use the Override settings option.
Note
The Override settings option is available when you select (highlight) a network level below
the appliance level. Use the Expand button to reveal the other levels.
Legacy Content Infrastructure Management
Extreme AirDefense User Guide for version 10.5. 1105