User's Guide

You have the option to save for the next update, update immediately or update later. If you choose to
update later, you must supply a date and time. You can supply a description that will help identify the
update later. A list of device types along with the number of aected devices that will be updated is
displayed. Also, if applicable, a list of unsupported settings is displayed. Click OK to apply changes or
Cancel to abort.
Updates to Channel Settings are treated as jobs and are included in Job Status under Configuration >
Operational Management. The description supplied in the confirmation helps identify jobs.
Click the Reset button to discard your changes.
Radio Settings
Radio Settings allow you to configure radios used in your network. Using ADSP, you specify the
supported rates and other settings for each radio. If a radio in your network is detected operating
outside the set specifications, ADSP issues an alarm.
The settings apply to APs and wireless switches. You may also define a radio as a Sensor.
You may configure Radio Settings at the appliance network level all the way down to the floor network
level, but you should always configure Radio Settings at the appliance level. Any network level below
the appliance level will inherit the configuration. If you need to have a dierent configuration below the
appliance level, use the Override settings option.
Note
The Override settings option is available when you select (highlight) a network level below
the appliance level. Use the Expand button to reveal the other levels.
Legacy Content Infrastructure Management
Extreme AirDefense User Guide for version 10.5. 1107