User's Guide

Function Description
Port Set the UI Port.
This setting configures the system port for access to ADSP.
Choose the system port from a port indicator/selector. Choices are
port 1024 through 65000.
Note: AirDefense will not allow you to choose a port already in use.
Mail Relay Server Define the mail relay host. Enter an IP address or a fully-qualified
host name.
Max Connections Specify the maximum number of application server connections
that can occur simultaneously.
User Session Limit Limit the number of login sessions that one user can have at any
one time.
Air Termination System Air Termination enables you to terminate the connection between
your wireless LAN and any associated authorized or unauthorized
or Wireless Client.
Yes: Click this radio button to enable AirTermination at the system
level. Once enabled, the AirTermination setting for individual
Sensors can also be enabled (See Sensor.)
No: (Default). Click this radio button to disable AirTermination.
Note: If you are not an Admin User, this setting will not be visible.
Policy-based Air Termination
System Enabled
Policy-based Air Termination is an automated version of Air
Termination. This feature enables you to formulate an Action Plan to
automatically terminate the connection between your wireless LAN
and any associated authorized or unauthorized or Wireless Client,
based on alarms.
Yes: Click this radio button to enable Policy-based Termination at
the system level.
No: (Default). Click this radio button to disable Policy-based
Termination.
Note: If you are not an Admin User, this setting will not be visible.
Configuration Appliance Settings
Extreme AirDefense User Guide for version 10.5. 111