User's Guide

Function Description
Port Suppression System Port Suppression enables you to turn o the port on the network
switch through which a device is communicating. You can suppress
the communications port for any network device, eectively
shutting down the communication port for the device.
Yes: Click this radio button to enable Port Suppression at the
system level. See the Note, below.
No: (Default). Click this radio button to disable Port Suppression.
Note: You must have added SNMP Managed Switches and have full
read and write privileges (see Adding/Importing Switches).
Auto-Logout Enabled Use this feature to enable/disable the automatic logout feature,
which logs a user out of AirDefense after a specified amount of
time.
Yes: Click this radio button to use Auto-Logout and activate the
Auto-Logout Timeout scroll list.
No: Click this radio button to disable the Auto Logout and
deactivate the Auto-Logout Timeout drop down list.
Note: You must log o AirDefense and then log back in before
changes take eect.
Auto-Logout Timeout (Minutes) This scroll list is activated when the Auto-Logout Enabled option is
selected. Use the scroll button to set the number of minutes for the
automatic logout feature to log users out of the system.
Note: You must log o AirDefense and then log back in before
changes take eect.
Spectrum Scan Timeout This drop-down menu allows you to set the timeout value for
scanning during dedicated Spectrum Analysis. The values can be 1 -
120.
Sensor Cloaking Limit The number amount of Sensors that can be cloaked at any one
time.
Backup / Restore Status
Backup / Restore Status allows you to view the status of your configuration backups and restores.
Backup / Restore Status
Configuration
112 Extreme AirDefense User Guide for version 10.5.