User's Guide

Use the Variables section to define configuration variances unique to the specific device parameters
listed. For example, highlight the Gateway parameter and click under the Device Value column to
display a field used to assign a unique Gateway address to this specific profile. Select and assign new
default values as needed for each available profile.
New user-defined variables can be added to the Variables section by adding a variable in the CLI
Commands section using the following format:
$[VARIABLE_NAME]
Once a variable is added to the CLI Commands section, it's name is displayed in the Variables section
with an empty default value. Only the following characters are supported in user-defined variables:
A-Z, a-z, 0-9, and _
Note
If you create a new variable and its name already exist in a profile, you will not be able to
remove it from the variable list. You can unset it so that it will not be used but it will still
appear in the variable list.
Below is a list of current extraction variables:
• IP(iface)
• MASK(iface)
• MASK
• GATEWAY
• GATEWAY(iface)
• HOSTNAME
•
DOMAINNAME
• DOMAINNAME(iface)
• DNS1
• DNS1(iface)
• DNS2
• DNS2(iface)
• WINS(iface)
Expansion variables are used to include information from profiles that are configured in ADSP. An
expansion variable will always end with _EXPANSION. For example, $
Legacy Content
Infrastructure Management
Extreme AirDefense User Guide for version 10.5. 1123