User's Guide

You can remove a statement by clicking the X next to the statement.
Actions
You may specify one or more actions to run when certain conditions are met as defined by the filter(s).
Valid actions are:
• Classify Devices - Classifies devices using the filter(s) to determine which devices are to be classified.
• Clear active alarm for active devices - Clears any active alarm if the conditions defined in the filter(s)
are met.
• Set Client Type - Sets the Client Type for Wireless Clients as defined in the filter(s).
• ACL - Enables the Access Control List on switches that meet the conditions defined in the filter(s).
•
Port Suppression - Suppresses communication between unauthorized devices and switches on your
network as defined in the filter(s).
• Termination - Terminates devices that meet the conditions defined in the filter(s).
• AP Test - Runs an AP Test using the specified profile if the conditions defined in the filter(s) are met.
• Frame Capture - Monitors and analyzes real-time data trac flow from devices in your wireless LAN
and saves the data in a file if the conditions defined in the filter(s) are met.
• Vulnerability Assessment - Runs an vulnerability assessment using the specified profile if the
conditions defined in the filter(s) are met.
• Delete Device - Deletes any device from your system that meets the criteria defined in the filter(s).
Legacy Content
Operational Management
Extreme AirDefense User Guide for version 10.5. 1173