User's Guide

connect to the appliance and your network tree will not be set up. Once connected to a lab network,
you can either restore the primary's configuration file, or restore the configuration from a secondary
appliance to the primary appliance. If the configuration is restored from the secondary appliance,
you should then change the IP address of the new appliance to the one for the old appliance, reboot,
and install the new appliance on the network.
• Once the new appliance is on the network, back up forensic data from the secondary appliance as
required.
• ADSP restores the configuration long before the screen indicates that the process is complete.
Executing a ping to the appliance will let you know exactly when the system is up. Once you receive
a response, you can then log back in.
Account Management
Account Management allows you to:
• Create and modify user accounts and group accounts (Accounts Access feature)
• Authenticate users on the local appliance (Local Authentication feature)
• Change the password of the current user (Password Reset feature)
• Authenticate users by using the password stored on a RADIUS or LDAP server (Remote
Authentication feature)
• Specify the user preferences that are used to set the ADSP auto refresh rate and to specify a proxy
to access the server (User Preferences).
Account Access
You can use the Account Access feature to:
• View user account information.
• Add user accounts:
◦ New User Account button.
◦ New Group Account button.
• Edit user accounts (Edit link).
• Delete user accounts (Delete link).
• Synchronize user accounts (Check Synchronization button).
Note
You must be an Admin User to use the Account Access feature.
To access this feature, go to Configuration > Account Management > Account Access.
New User Account
Select the New User Account option from the drop-down menu to display the New User Account page.
Legacy Content
Account Management
Extreme AirDefense User Guide for version 10.5. 1235