User's Guide

The fields used to schedule a Spectrum Analysis are:
Field Description
Schedule There are five options to schedule an assessment. Depending on
the option you select, you must fill in the related fields as follows:
• One Time Schedule—Choose a time for the assessment by
selecting a time from the Time drop-down menu. Then, select a
day for the assessment by clicking the Calendar button in the
Date field and selecting a date.
• Intra-Day Schedule—Select a time to begin the assessment.
Then, select a frequency in hours.
• Daily Schedule—Select a frequency in day, weekdays only, or
weekends only. Then, select a time of day.
• Weekly Schedule—Choose a frequency in days. Then, select a
day or multiple days to conduct the assessment by clicking the
checkbox next to the day to place a checkmark in the box.
• Monthly Schedule—Choose the months that you want to run a
assessment by clicking the checkbox next to the month(s) to
place a checkmark in the box(es). Then, select a day of the
month to conduct the assessment. Last, specify a time of day.
Time Limit Places a time limit on how long the Spectrum Analysis will run.
File Name Prefix Defines a prefix for the Spectrum Analysis (ADSA) file that is saved
when the Spectrum Analysis is complete. You may add to the prefix
if you want to. The saved file can be opened by selecting Menu >
Open > Spectrum Analysis .
Spectrum Settings Only used in regular Spectrum Analysis. These are the same
Spectrum Settings described under In the Sensor Operation
settings of the Sensor Monitoring category under the Configuration
tab, there is an option to enable background scanning..
Advanced Spectrum Settings Only used in Advanced Spectrum Analysis. These are the Dedicated
Scan Settings described under Each time a scan is started, the table
clears and is updated when data becomes available..
You can switch devices by clicking Search button.
Drop-down Menu Access
Legacy Content
1334 Extreme AirDefense User Guide for version 10.5.