User's Guide

Add a CLI Profile
To create a new profile, select a device from the CLI Configuration drop-down menu and then click the
New Template button. The following fields are available:
Field Description
Name This field is used to name your new profile.
Device Type This field displays the device that was selected from the CLI
Configuration drop-down menu. You cannot change the device
once it has been chosen.
CLI Commands Displays the CLI commands that are part of the selected template.
These commands are editable. Be very careful when making
changes. Only make changes to CLI commands if you have
knowledge about the commands for the device associated with the
template.
Apply a CLI Profile
After creating a CLI Profile, you must apply the profile to your network. Usually, you will have a CLI
profile that can be used on a large majority of devices in your network. However, there will be times
where you may need a special profile for a specific building or even a specific floor within a building.
If you have a CLI profile that works on a large majority of devices in your network, you should apply it at
the appliance level. Then, if you have a special profile that fits the needs of a specific building or a
specific floor in a building, you can override the appliance level profile and apply it to a lower network
level.
Legacy Content
Infrastructure Management
Extreme AirDefense User Guide for version 10.5. 1395