User's Guide

Figure 22: Auto-Placement Rules
The screen displays the following information:
Field Description
Rule Name This field displays the name of the auto-placement rule.
Destination This field displays the destination configured for this rule. This is the
location where a device that matches the auto-placement rule is
placed in.
Action The icons in this field enable you to view, edit or delete auto-
placement rules. Use the icon to view the rule's configuration in
a dierent dialog. Use the to delete the selected auto-
placement rule. Similarly use to edit the auto-placement rule.
For more information, see Edit an Auto-Placement Rule on page
157.
Use the area to search for a particular auto-placement rule.
The Auto-Placement Rules screen has a provision to manually run the auto-placement rules listed in
this screen. By default AirDefense runs the auto-placement rules periodically. To force AirDefense to run
the auto-placement rules on demand, select the icon located to the top right of this screen. When
selected, all the rules configured in this screen are run immediately on the devices listed in the Unplaced
Devices screen.
To add more auto-placement rules, use the icon located to the top right of this screen. For more
information, see Add an Auto-Placement Rule on page 154.
Add an Auto-Placement Rule
Auto-Placement rules configure where devices are placed when they are imported into the AirDefense
managed network.
Add an Auto-Placement Rule
Configuration
154 Extreme AirDefense User Guide for version 10.5.