User's Guide

You can directly edit the rule set from within this dialog. Click the icon located to the top right of the
dialog to edit it.
Add Alarm Action Manager Rule Set
An Alarm Action Manager profile is a set of rules that govern the automatic actions that can be
performed when certain alarms are raised. These actions can be performed based on which alarms are
monitored and other filtering criteria.
New Alarm Action Manager rule sets are created from the Alarm Action Manager Rule Set Screen. Use
the icon to add a new Alarm Action Manager Rule Set. The same screen is also used to edit an
existing rule set of the same type.
Figure 32: Add an Alarm Action Manager Rule Set
To create a new Alarm Action Manager rule set, you need to do the following:
1. Assign a name to your Alarm Action Manager rule set. Use the Profile Name field that is located in
the Alarms tab of this screen.
2. Select the individual alarms or group of alarms from the Alarms tab.
3. Create at least one filter for the rule set. You can add up to twenty five (25) filters for every Alarm
Action Manager rule set. Filtering enables you to remove data that does not interest you.
4. Create at least one action that needs to be performed for this Alarm Action Manager rule set.
Select Alarms
The Alarms tab of the Alarm Action Manager dialog lists all alarms that are raised by the AirDefense
system. These alarms are classified under eleven (11) major categories with many sub-categories for
each of them. The major categories of alarms are:
• Anomalous Behavior - This is a collection of all alarms that indicate behavior that is dierent from
the normal behavior of a device within the AirDefense system.
• Bluetooth - This is a collection of all alarms that are related to Bluetooth and BLE devices.
Configuration
Add Alarm Action Manager Rule Set
Extreme AirDefense User Guide for version 10.5. 193