User's Guide

To create a new wireless client/BSS rule set, you need to do the following:
1. Assign a name to your Device Action Manager rule set. Use the Name field that is located to the top
left of the screen.
2. Create at least one Rule for this rule set. You can add up to one hundred (100) rules to your rule set.
Use the Add Another Rule button to add additional rules.
For each rule in your rule set, you must define at least one filter criteria and one action.
3. Create and add at least one filtering criteria for each rule that you create. You can add up to twenty
five (25) criteria per rule in your rule set. Use the icon in this tab to add new filters.
4. Create and add at least one action for the rule set. You can add up to five (5) actions for this rule set.
Use the icon in this tab to add new actions.
Configuring Filters
Configure your filters by using logical constructs of AND, OR, and NOT that are available for use when
creating and adding multiple filter criteria to your rule. These logical constructs are explained below.
• AND - All the conditions defined for this rule must be met for the actions to be triggered.
• OR - One or more of the conditions defined for this rule set must be met for the actions to be
triggered.
• NOT (AND) - This is the opposite condition of the AND construct. None of the selected conditions
should meet for the action to be triggered.
• NOT (OR) - This is the opposite condition of the OR construct. One or more of the specified filter
conditions must not be met for the action to be triggered.
The available filters are:
• Adhoc
• Associated
• AssociatedBSSClassification
• AssociatedBSSIP
• AssociatedBSSMAC
• AssociatedBSSName
• AssociatedBSSVendorPrefix
• Channel
• ConnectedToWired
• Device802_1XName
•
DeviceAuthentication
• DeviceClassification
• DeviceClassificationInherit
• DeviceClientType
• DeviceEncryption
• DeviceFirstPolled
• DeviceFirstSeen
• DeviceIP
Add a Device Action Manager Rule Set
Configuration
216 Extreme AirDefense User Guide for version 10.5.