User's Guide

• DeviceSerial
• DeviceVendorPrefix.
Important
In the Device Action Manager, the order of filters within the rule defines how the filters are
applied. For example, if you want create a rule to sanction only BSSs, the first filter should be
defined as DeviceType=Include BSS before defining other rules such as
DeviceManufacturer or DeviceSSID. Setting the DeviceType=Include BSS as the
first filter will cause all wireless client devices to be ignored.
Add Actions
Actions are configured from the Actions tab. You can specify one or more (up to five (5)) actions that
can be performed when the conditions set in the Filters tab are met. The valid actions are:
• Clear active alarm - Clears any active alarm if the conditions defined in the filter(s) are met.
• Frame Capture - Monitors and analyzes real-time data trac flow from devices in your wireless LAN
and saves the data in a file if the conditions defined in the filter(s) are met.
• Data Collection - Automatically corrects configuration compliance violations when conditions
specified in the filters are met.
• Live RF / Floor Plan - Automatically updates the heat map predictions in the Live-RF window.
• ACL - Enables the Access Control List on devices that meet the conditions defined in the filter(s).
• Port Suppression - Suppresses communication between unauthorized devices on your network as
defined in the filter(s).
• SNMP Trap - Generates SNMP traps when the conditions specified in the filters are met.
• Spectrum Analysis - Runs a Spectrum Analysis or Advanced Spectrum Analysis using the profile
specified when the conditions specified in the filters are met.
• Delete Device - Deletes any device from your system that meets the criteria defined in the filter(s).
Use the
icon to add an action to your Device Action Manager Rule Set. You can add up to five (5)
rules for each rule set. Configuration settings will be dierent for each action. For example, the
following is the configuration settings when you select Email as your action.
Figure 72: Action - Send Email
Add a Device Action Manager Rule Set
Configuration
228 Extreme AirDefense User Guide for version 10.5.