User's Guide

Provide the following configuration information.
Field Description
Time Limit Specifies a time duration for the Spectrum Analysis to run. Time can
be set in number of minutes. Use the spinner control to configure
this value.
File Name Prefix Specifies the prefix for the spectrum analysis file. This prefix is used
when creating your spectrum analysis file.
Spectrum Settings Select this tab for configuring the regular Spectrum Analysis
settings.
Advanced Spectrum Settings Select this tab for configuring the Advanced Spectrum Analysis
settings.
Hover on the Spectrum Analysis box to view a synopsis of its configuration.
Spectrum Setting
Provide the following configuration information for the normal Spectrum Analysis
Field Description
Scan Type Select one of Full Scan or Interference Scan.
• Full Scan scans the entire 2.4GHz bandwidth (in 5MHz steps)
and 5GHz bandwidth (in 20MHz steps) with a short dwell time
(around 50 ms). It supports limited classification of interference
sources.
• Interference Scan scans three frequencies in the 2.4GHz band
and three frequencies in the 5GHz band with a longer dwell time
(around 500 ms). It supports classification for all interference
sources.
Pulse Definition Defines the values for each pulse when performing Spectrum
Analysis. Use the Threshold control to set the pulse threshold value
in dBm. Use the Width control to define the gap between two
consecutive pulses.
Advanced Spectrum Settings
Provide the following configuration information for the Advanced Spectrum Analysis
Select the scan type. Select one of Dedicated Scan or In-Line Scan.
• Dedicated Scan is a full, detailed spectrum scan.
• In-Line Scan is a spectrum scan of all channels except the 802.11 channels and bands.
Add a Device Action Manager Rule Set
Configuration
234 Extreme AirDefense User Guide for version 10.5.