User's Guide

For each of the above scan types, provide the following configurations:
Field Description
Scan Time Defines the scan time in milliseconds. Use the spinner control to set
this value. The default value is 1000 milliseconds.
Threshold For both the 2.4 GHz and 5.0 GHz bands, set the threshold value in
dBM.
Duty Cycle Threshold For both the 2.4 GHz and 5.0 GHz bands, set the duty cycle
threshold value in dBM.
Add a New BT/BLE Rule Set
Use the Device Action Manager screen to add a new BT/BLE rule. The same screen is also used to edit
an existing rule set of the same type.
Figure 81: Add a Device Action Manager Rule Set
The actions that you need to perform to add a new BT/BLE Device Action Manager rule set is the same
as those that you need to perform to add a new Wireless Clients/BSS rule set. For more information,
see Add a New Wireless Client/BSS Rule Set on page 215.
Configuring Filters
Configure your filters by using logical constructs of AND, OR, and NOT that are available for use when
creating and adding multiple filter criteria to your rule. These logical constructs are explained in the
topic Configuring Filters on page 216.
The available filters for BT/BLE devices are:
• BLEType
• DeviceClassification
• DeviceClientType
• DeviceFirstSeen
• DeviceLastSeen
• DeviceMAC
Configuration
Add a Device Action Manager Rule Set
Extreme AirDefense User Guide for version 10.5. 235