User's Guide

• DeviceManufacturer
• DeviceVendorPrefix
• SignalStrength
• URL
• UUID
Add Actions
Actions are configured from the Actions tab. You can specify one or more (up to five (5)) actions that
can be performed when the conditions set in the Filters tab are met. The valid actions are:
• Classify Devices - Classifies devices using the filter(s) to determine which devices are to be classified.
• Clear active alarm - Clears any active alarm if the conditions defined in the filter(s) are met.
• Set Client Type - Sets the Client Type for BT/BLE devices as defined in the filter(s).
• Delete Device - Deletes any device from your system that meets the criteria defined in the filter(s).
• Email - Sends an email to the administrator if the conditions defined in the filter(s) are met.
Use the
icon to add an action to your Device Action Manager Rule Set. You can add up to five (5)
rules for each rule set. Configuration settings will be dierent for each action. For example, the
following is the configuration settings when you select Email as your action.
Figure 82: Action - Send Email
The send email action enables to send an email when the conditions specified in the Filters tab are met.
You can send mails to multiple persons with customized subject, priority, and the email from which this
mail is supposed to originate.
When you create an action, its name is added to the top of the Actions tab.
To delete a specific action, use the small X button located to the top right of the action's name in the
tab. When you click the button, the action is immediately removed.
Once you have configured your Device Action Manager Rule Set, click the APPLY button located to the
top right of this window. The rule is saved and is added to the list of Device Action Manager rule sets.
Add a Device Action Manager Rule Set
Configuration
236 Extreme AirDefense User Guide for version 10.5.