User's Guide

This control displays the following additional information for your Scan Mode selection.
Field Description
Channel Range Bar The channel range bar control enables you to narrow down the
range of channels to those channels you are interested in.
Use the small rectangular handles at the vertical edges of the bar to
narrow down your selection of channels. The number of records
shown in the Records control changes to reflect the number of
channels that you have selected. The Range control changes to
show the radio frequency range of the channels that you have
selected.
You can also click and drag the yellow bar to slide the bar within the
control. Sliding the bar selects the appropriate channels within the
bar's coverage.
To reset your channel selection, click the small x located to the right
of the Range control. This resets your channel selection
immediately.
Records This control displays the number of records displayed for your
current scan mode selection and the number of channels that have
been selected based on your filter.
Channel List This field displays the channels for your current Scan Mode and the
filter (if any) that you have applied to narrow down your channel
selection.
The fields in this control are not editable.
Operation Tab Configuration
244 Extreme AirDefense User Guide for version 10.5.