User's Guide

option to monitor this level and all the levels below it. Customize the monitoring options to meet your
requirements.
For more information on overriding, see the section Overriding Configuration Settings in this document.
Network PCI Compliance Monitoring
Use the Set Network PCI Scope button to add VLANs to be monitored for PCI compliance. When this
button is selected, the Network PCI Scope screen displays.
Figure 95: Network PCI Compliance Screen
Use the Add VLANs to PCI scope field to enter the VLAN that has to be monitored. Select the icon
next to this field to add this VLAN to the list below. You can add multiple VLANs to monitor for PCI
compliance. Once you have added all the VLANs, click the OK button to save your chages.
Overriding Configuration Settings
The Enable Configuration switch is only available at the top most node of the Structure & Tags pane.
Configurations can only be applied when this switch is set to ON. The top most node is always named
ADSP and you must use this switch to apply the selected configuration through out the Extreme
AirDefense system.
By default, any level in the Structure & Tags pane always inherits configuration from the level above it
unless explicitly overridden.
Since Extreme AirDefense manages its devices using a hierarchy that is configured using the Structure
& Tags pane, all the nodes under the top ADSP node inherit the configurations set at that node.
However, you can override the inherited configuration at any level in the hierarchy.
To override the inherited settings, in the Structure & Tags pane, select the node where you want to
override the inherited configuration. Then from the
control, select the
Override option. Note that the Inherited from : control always displays the name of the level from
which the configuration settings are inherited from. Use this information to orient your self on how the
configurations are inherited.
Network PCI Compliance Monitoring
Configuration
258 Extreme AirDefense User Guide for version 10.5.