User's Guide

• A license will not be assigned if there are no licenses available to apply.
• After a license is applied, the number of available licenses is reduced accordingly.
To enable or disable Auto Licensing for the selected licenses:
1. Select the Enable Configuration switch to enable applying Auto Licensing for your various licenses.
At a level that is lower than the Appliance level, select the Override button.
When you select the Enable Configuration switch or the Override radio control, option controls
appear next to all the licenses.
Note
Option controls next to the ADSP Platform and Central Management are disabled by
default as these are the base licenses available with all AirDefense instances.
2. Select the option control for each license that you want to auto apply.
The AUTO LICENSE button is enabled. This button is located to the top right of the pane.
3. Select those licenses that you want modified and then select the AUTO LICENSE button.
The Enable/Disable Auto Licensing dialog displays.
4. Review the list of licenses that you have enabled or disabled.
5. Select the ENABLE button to enable the selected licenses.
All feature licenses that are auto-licensed are indicated with the icon. Normal licenses are
indicated with the icon.
The process to change the selected licences from Auto Licenses to normal licenses is the same.
Select the DISABLE button instead.
At anytime, select the CANCEL button to cancel this activity.
Important
Please note that Auto License is only available till the Enable Configurations switch is set
to On. It is not enabled if the Enable Configuration switch is set to Off.
Add Licenses
Use the License Configuration screen to add new feature license to this AirDefense instance.
Add Licenses
Configuration
306 Extreme AirDefense User Guide for version 10.5.