User's Guide

Select all the vendors you recognize as authorized and permanent for that site. (Help text is provided
just above the Mass Wired Network Device Classification button.) Then, sanction devices detected at
your site by clicking OK.
To have a finer control over alarms about new known vendor devices and new unknown vendor devices,
you can utilize the Known Vendors classification tool. Click on the Known Vendors button to display a
list of known vendors.
Select the approved vendors and click OK.
After configuring the Wired Network Monitoring options, click the Apply button to save your changes.
Click the Reset button to discard your changes.
Once new devices are detected at your site, you will receive one of two alarms: New Wired Device
Detected Known Vendor or New Wired Device Detected Unknown Vendor. Below is a
screen shot of Alarm Configuration, where you can customize the criticality, duration, state and
exception for each of the alarms.
Configuration
Tab Generate Alarm Policy for New Devices
Extreme AirDefense User Guide for version 10.5. 539