User's Guide

3. Select (highlight) the upgrade file and then click Open. An Identify Firmware Image File window is
displayed with the image file name identified.
4. Click OK. The firmware image is uploaded and now appears in the list of devices. It can now be used
to upgrade APs or Sensors on your network.
Note
This symbol indicates something of special interest or importance to the reader. Failure to
read the note will not result in physical harm to the reader, equipment or data.
You can delete firmware from the list by selecting (highlighting) the device and then clicking the
Remove button.
The Check Synchronization button is used to check all appliances in the network to ensure they
have the same firmware. (The synchronization features works basically the same way wherever the
feature is implemented. Synchronizing User Accounts. topic has a good example of how the
synchronization feature works.)
Note
You must have a Central Management license in order to use the Check Synchronization
feature.
RF-Domain
RF-Domain provides information to ADSP so that ADSP can apply the correct regulatory rules to the
domain. This information includes domain location and contact information of the person responsible
for the domain. The country is crucial in applying the regulations.
You may configure RF-Domain at the appliance network level all the way down to the floor network
level, but you should always configure RF-Domain at the appliance level. Any network level below the
appliance level will inherit the configuration. If you need to have a dierent configuration below the
appliance level, use the Override settings option.
Note
The Override settings option is available when you select (highlight) a network level below
the appliance level. Use the Expand button to reveal the other levels.
Configuration Tab RF-Domain
Extreme AirDefense User Guide for version 10.5. 567