User's Guide

Field Description
WEP Keys Specifies the WEP keys used to connect to the network. The WEP
key may be ASCII or hexadecimal. You may also elect to transmit
the WEP key. Check the Display Passwords check box to display the
passwords in plain text. Use the Add button to add a new key or the
Delete button to delete a key.
RADIUS Servers
Note: This field is displayed only when the authentication method is
WPA, WPA2, or Legacy EAP.
Lists any RADIUS servers used in authentication. You can edit or
delete a highlighted server by clicking the appropriate button. You
can add new servers by clicking the New Server button which
displays the following overlay:
You must supply the following information:
• A name for the RADIUS Server Profile.
• The IP address or host name of the RADIUS server.
• The RADIUS server port used for communications.
• The shared password of the RADIUS server. Select the Display
Passwords check box if you wish the password to be displayed
while typing it.
• A protocol selected from the drop-down menu (PAP, CHAP,
MSCHAP, or MSCHAPv2).
• A timeout value and a time interval selected from the drop-
down menu (Seconds or Minutes).
• The maximum number of retries to connect to the RADUIS
server.
Click Save to save the RADIUS server information.
Apply a WLAN Profile
Once you have defined a WLAN Profile, to use it, you must apply it to your system. To apply a WLAN
Profile, you must first select the Enable configuration checkbox .
Configuration
Tab WLAN Profiles
Extreme AirDefense User Guide for version 10.5. 579