User's Guide

To create a new profile:
1. Select one of the supported CLI configurations from the CLI Configuration drop-down menu.
The selected profile is accessed.
Note
You can reduce the list of supported devices to only the devices in your system by
selecting the Only show device type in system checkbox.
2. If you want to add a new profile at the appliance level, select the appliance level and then select the
Enable configuration checkbox. If you want to add a new profile at a lower network level, select the
appropriate level and then select the Override settings radio button.
CLI
Configuration Configuration Tab
582 Extreme AirDefense User Guide for version 10.5.