User's Guide

The commands are applied to all devices in the selected scope. The scope may be any network level or
floor. To select a scope, just select a scope from the Scope drop-down menu.
Each command must be on a line by itself. If a command requests a confirmation from a device,
AirDefense will respond Yes.
You may import an updated configuration from device(s) after a command has run successfully. Just
select the Import checkbox.
The logs for the Command Run and Log are placed at: /usr/local/smx/device-mgmt/jobs. For
each job, there is a job ID. The interaction with all devices for a job is placed in a sub-folder whose name
is the job ID number.
After selecting a scope and entering your CLI commands, click Apply to run the commands. Clicking
Reset returns Command Run and Log back to its original state.
You can check the job status by navigating to Configuration > Operational Management > Job Status.
While viewing the job details, you can view the logs by selecting a device and then clicking the View
Log link.
Configuration
Tab Command Run and Log
Extreme AirDefense User Guide for version 10.5. 589