User's Guide

There are three things that you must do to define a Wireless Client / BSS / Unknown Devices Rule Set:
1. Name the rule set.
2. Select and define at least one filter. You may have up to ten filter. Click the Add Another button to
add additional filters. Each added filter adds an and statement.
3. Select and define at least one action. You may have up to five actions. Click the Add Another button
to add additional actions.
A rule set may have one or more rules. Each rule must have a least one filter and one action. Click the
Add Another Rule button to add additional rules.
Configuring Filters
Configure your filters by using a When statement and an If statement. Begin by selecting when the
filters (When statement) will be used. There are four options:
• All - All of the selected conditions must be met (logical and operation).
• Any - One or more selected conditions must be met (logical or operation).
• None (All) - None of the selected conditions are met (logical and operation).
• None (Any) - One or more selected conditions are not met (logical or operation).
Configuration
Tab Device Action Manager
Extreme AirDefense User Guide for version 10.5. 633