User's Guide

• DevicePolledIP
• DeviceSensedIP
• DeviceSerial
• DeviceVendorPrefix.
Actions
The available actions for the Infrastructure Device Rule Set are:
• Clear active alarm for active devices - Clears any active alarm if the conditions defined in the filter(s)
are met.
• Frame Capture - Monitors and analyzes real-time data trac flow from devices in your wireless LAN
and saves the data in a file if the conditions defined in the filter(s) are met.
• Data Collection - Corrects configuration compliance violations when the conditions defined in the
filter(s) are met.
• Live RF / Floor Plan - Runs an infrastructure device poll to update the heat map predictions in Live
RF if the conditions defined in the filter(s) are met.
• ACL - Enables the Access Control List on switches that meet the conditions defined in the filter(s).
• Port Suppression - Suppresses communication between unauthorized devices and switches on your
network as defined in the filter(s).
• SNMP Trap - Sends an SNMP notification to your SNMP server if the conditions defined in the
filter(s) are met.
• Spectrum Analysis - Runs a regular Spectrum Analysis or an Advanced Spectrum Analysis using the
specified profile if the conditions defined in the filter(s) are met.
• Delete Device - Deletes any device from your system that meets the criteria defined in the filter(s).
• EMail - Sends information about an alarm via email to a recipient if the conditions defined by the
filter(s) are met.
Applying a Device Action Manager Template
Once you have defined Device Action Manager templates, to use them, you must apply them to your
system.
Note
You may select multiple Device Action Manager templates by checking more than one
checkbox.
Configuration Tab Device Action Manager
Extreme AirDefense User Guide for version 10.5. 641