User's Guide

3. Enter the port number of the primary server in the Port field.
4. Enter the username in the Username field that allows you to log in on the primary server you are
synchronizing with.
Note
It is a good practice to setup an admin account (using the same username and password)
on both the primary and secondary server.
5. Enter the password in the Password field that allows you to log in on the primary server you are
synchronizing with.
6. Select whether you want to synchronize appliance name and/or synchronize mail relay.
7. Click the Sync Now button. Configuration files are downloaded to the secondary server.
Automatic Synchronization
Follow these steps to set up automatic synchronization of your primary and secondary ADSP
appliances:
Note
Do not configure the automatic backup time and the automatic synchronization time with the
same values.
1. Enable automatic synchronization by selecting the Designate this as a Secondary (redundant)
appliance checkbox to place a checkmark in the box.
2. Enter the address, port, username, and password as described for manual synchronization.
3. Select whether you want to synchronize appliance name and/or synchronize mail relay.
4. Decide how often you want to run the synchronization by selecting One Time Schedule,
Intra-Day Schedule, Daily Schedule, Weekly Schedule, or Monthly Schedule
from the drop-down menu.
Depending on the interval you selected in the previous step, fill in the related fields using the
following table:
Interval Action
One Time Schedule Choose a time for the synchronization by selecting a time from the
Time drop-down menu. Then, select a day for the synchronization
by clicking the Calendar button in the Date field and selecting a
date.
Intra-Day Schedule Select a time to begin the synchronization. Then, select a frequency
in hours.
Daily Schedule Select a frequency in day, weekdays only, or weekends only. Then,
select a time of day.
Weekly Schedule Choose a frequency in days. Then, select a day or multiple days to
conduct the synchronization by clicking the checkbox next to the
day to place a checkmark in the box.
Monthly Schedule Choose the months that you want to run the synchronization by
clicking the checkbox next to the month(s) to place a checkmark in
the box(es). Then, select a day of the month to conduct the
synchronization. Last, specify a time of day.
5. Click the Apply button to set the automatic synchronization schedule.
Redundant Appliance Sync
Configuration Tab
698 Extreme AirDefense User Guide for version 10.5.