User's Guide

Field Description
Authentication Select Local if the user will use Local Authentication. Select Remote
if the user will use Remote Authentication. Select Remote with
local fall back if the user will use Remote Authentication with local
fall back.
Note: At least one Administrator should be set to Local
Authentication to avoid getting locked out of the system if a WLAN
link is disconnected.
When adding a remote user, Remote Authentication must be set up
first. Once Remote Authentication is set up, select the Remote
radio button.
You can test remote user authentication using the Test
Authentication button.
Enter a username and password. Then, click the Test button. If the
credentials are valid, you will receive a pass message. If the
credentials are invalid, you will receive a failed message.
New Password Enter a new password for the user.
Note: Password must include lowercase letters and uppercase
letters. Password must be 6-32 characters in length. Password may
not contain spaces or tabs.
Verify Password Enter the new password again to verify the password.
Lock Account Check this checkbox if you want to lock the account.
Account Access Configuration Tab
702 Extreme AirDefense User Guide for version 10.5.