User's Guide

4. Setup network device configuration action:
a. The system must be enabled to allow configuration push to the new infrastructure devices. To set
this up, go to Configuration > Appliance Platform > Polling.
b. Enable the following settings:
• Automatically Correct Configuration Compliance Violations
• Device Configuration Management
• Template Based Configuration Management
5. Set up Relay Server:
• Configure the relay server for use with configuration management. The relay server setup is not
specific to the zero touch feature, instructions for setup can be found in Menu > Help > Search
for Relay.
6. Configure non default device credentials:
a. Some infrastructure devices require changing the administrator password at first login. The ADSP
system must be setup with the credentials to use for configuring the device. The credentials can
be set by going to Configuration > Infrastructure Management > Device Access.
b. Enable configuration.
c. Add an admin user with password. Make sure this password is dierent than the default since
most devices will reject resetting the password to the default value.
Automatic
Configuration of WLAN Infrastructure
Devices Configuration Tab
724 Extreme AirDefense User Guide for version 10.5.