User's Guide

Field Description
In compliance / Not in
compliance
Status of the last compliance audit.
Click the Managed Configuration button to display the Wireless
Switch configuration.
Click the Generated Configuration button to display a generated
configuration for a Wireless Switch. The generated configuration is
the same configuration sent to a relay server to configure a Wireless
Switch.
Click the Push Configuration button to push the existing
configuration out to the Wireless Switch.
Observed Data Data that AirDefense Services Platform observed about the
Wireless Switch. You can filter the observed data by entering
significant text in the Search field.
The scope of the Wireless Switch is shown under the Scope tab. The Autoplace button can be used to
place the Wireless Switch in a network folder using Auto-Placement rules.
Alarms related to the Wireless Switch are shown in the Alarms tab. The Actions button can be used to
perform one of the listed functions on a selected (highlighted) alarm.
You can view and/or override a Wireless Switch's configuration by selecting:
• CLI Configuration on page 580
• Device Access on page 563
• RF-Domain on page 567
• Relay Server on page 529
• Communication Settings Profile on page 520
• License— Display valid licenses for Wireless Switch.
These configuration settings are all located in the Configuration Tab on page 493.
If you make changes, click Save to save them.
Click the Delete Device button to delete a device from your network.
Click the Close button X to close the Properties overlay.
Wired Switch Drop-down Menu
The Wired Switch drop-down menu contains functions that you can apply to the selected Wired Switch.
Click the drop-down menu button
next to the Wired Switch name to display the drop-down menu.
DevicesDrop-down Menu
Configuration Tab
754 Extreme AirDefense User Guide for version 10.5.