User's Guide

The drop-down menu for campuses contains the following functions:
Function Description
Alarms Accesses the Alarms tab where you can view the alarms for the
selected Campus. See Alarms on page 477 for more information.
Properties Opens the Properties overlay for the selected Campus.
Readiness Test Validates that devices in the campus scope are management ready
(that is, devices can be manage through ASDP). You are alerted of
problem areas. (See Readiness Test on page 787 for more
information.)
Action Rules on Demand Runs an on demand test on your alarm action rules and/or device
action rules.
You can run the test and view the results later in Job Status on page
643, or you can run the test now and view the results now. There
are two options for each type of test:
• Only enabled rules-run test on the enabled rules.
• All rules-run test on all rules (enabled or not). This option is
deactivated on run now tests.
Upgrade Upgrades the firmware for devices in the selected Campus. See
Upgrade Devices for more information.
Add Folder Adds a new folder to the network tree by selecting one of the
available network levels. The added folder is given a generic name.
You should rename the new folder.
Copy Folder Copies the network scope of a Campus.
Enter a name for the campus, select if you want the to include the
floor plans or not, and click OK.
Rename Opens a dialog window to rename the selected Campus.
Remove Removes the selected Campus from your network.
Network Level Drop-down Menus Configuration Tab
810 Extreme AirDefense User Guide for version 10.5.