User's Guide

input the MAC of each Wireless Client (MU) into the switch, and then wait until it is pushed into ADSP.
Follow these steps:
1. Log in to the RFSX000.
2. Navigate to Security > Enhanced Probe/Beacon Table > Probe Table.
3. Select the Enable Enhanced Probe Table check box.
4. In the Preferred MUs section, click the Add button.
5. Enter the MAC address of the MU (Wireless Client) that you want to populate the Probe Request
table with data.
6. Click OK.
7. Click Apply.
8. Navigate toNetwork > Access Port Radios.
9. Double-click on the B/G radio of the AP650.
10. Select the Enable Enhanced Probe Table check box.
11. Click Apply.
12. Repeat Step 9, Step 10, and Step 11 for the A radio.
13. Restart the controller.
Unplaced Devices Level Drop-down Menu
The Unplaced Devices level drop-down menu contains functions that you can apply to the selected
Unplaced Device level. Click the drop-down menu button next to the Unplaced Devices name to
display the drop-down menu.
Configuration
Tab Unplaced Devices Level Drop-down Menu
Extreme AirDefense User Guide for version 10.5. 839