User's Guide

Column Description
Sensed Authentication Displays the sensed method of authentication.
Sensed Encryption Displays the sensed method of encryption.
Polled Authentication Displays the polled method of authentication.
Polled Encryption Displays the polled method of encryption.
Protocols Displays the protocols being utilized by the Wireless Client.
Rogue Indicates if a Wireless Client is a rogue (true or false). (default
header)
Device Actions Indicates if any of the following actions have occurred:
• AP Test
• Wireless Vulnerability Assessment
• Termination
• Dedicate Spectrum Analysis
• Inline Spectrum Analysis
Associated BSS Displays the BSS that the Wireless Client has associated with.
AP Displays the name of the . (default header)
Sensor Displays the name of the Sensor that sees the Wireless Client.
Unknown Devices
Click the drop-down menu under Show and click on Unknown Devices. AirDefense displays a list of all
Unknown Devices seen in your network. Unknown devices are defined from the source or destination
address detected in communication to or from a wireless device. AirDefense can identify the wireless
device the frame is sent from or received by, but if the MAC address listed as the ultimate source or
destination is not a device identified by AirDefense, it is considered 'unknown'. These are almost always
infrastructure devices on the wired network.
Network Devices
Legacy Content
980 Extreme AirDefense User Guide for version 10.5.