User's Guide

• Flag - you can optionally view all flagged devices.
• Alarm Severity - you can view devices by alarm criticality.
• Alarm Type - filters devices by alarm type.
• Device - filters devices by model, manufacturer, and/or capabilities.
• Compliance - displays devices according to state of compliance with network policies.
• Status - displays devices according to their uptime/oine status.
• Signal Strength - filters devices within a specific signal strength range.
• Security-Sensed Filter - displays devices using a combination of the sensed method of
authentication and/or the sensed method of encryption.
• Security-Polled Filter - devices using a combination of the polled method of authentication and/or
the polled method of encryption.
The filters are initially set to display the maximum amount of devices. You can adjust any filter or
combination of filters to fine tune the display of devices. This allows you to display only the devices that
you want to view.
The indicator on the right of each filter turns green
when you change a filter from its original state.
Click the green indicator to return a filter to its default state.
Grouping Filter
The Grouping filter allows you to view devices by grouping them using similar criteria. The views vary
depending on the type of devices being displayed.
The following views are available:
• No Grouping - Displays all devices without grouping. This view is accessible when displaying any
type of device.
• Severity - Groups devices into the dierent threat levels to your network. Threat levels that are not
sensed are not shown. This view is accessible when displaying any type of device.
• Last Seen - Groups devices by a time frame when the devices were last seen on your network. This
view is accessible when displaying any type of device.
Network Filters
Legacy Content
986 Extreme AirDefense User Guide for version 10.5.